Wolf stove – An electric cooker must be connected to an appropriate outlet of 220 volts to operate. There are two different types of outlets 220 volts commonly found in homes – the taking of three slots and four output slots. Because of this, manufacturers of stove not pre-wire stoves with one or the other outlets. You must connect the stove before installation. Fortunately, it is a quick job that only requires simple tools.
Loosen the screws on the corners of the cover electrical access panel wolf stove. Remove the cover and look inside. Look for a set of three screw terminals in a row, with a single screw terminal, green, found below the three. Loosen the terminal screws with a screwdriver. Loosen the clamp screw small stress relief metal at the bottom of the access panel. Insert the cable end of the power plug of the stove that has four cables through the clamp and pull the cable through so that the ends of the cables can reach the screw terminals.
12 Photos Gallery of: Wiring Wolf Stove Ideas
Place the end of the green wire to the green screw terminal and tighten the screw. Tighten the screw clamp strain relief. Replace the cover panel wolf stove and secure with screws.